Dilution Ratio: May be diluted with clean water, not exceeding 20% by volume

Coverage Rate: 8-10m²/kg per coat (Actual coverage may vary based on application method or wall surface roughness)

Recoat Time (h/25°C): Surface dry in 1 hour; recoatable in 3-4 hours

Application Method: Thoroughly stir before use. Apply via brush or spray coating.

Substrate Preparation:

1. Substrates must be sound, solid, dry, level, clean, free of loose dust, and oil-free.

2. Must be primed with an appropriate primer. Primer must be applied evenly and completely seal the substrate.

3.Before priming, check the moisture content and pH value of the putty on the substrate. Moisture content must be below 10%, pH below 10.

Application Conditions. Avoid application when temperature is below 5°C or relative humidity exceeds 85%.